MS2830A Spectrum Analyzer/Signal Analyzer MS2830A

The Spectrum Analyzer/Signal Analyzer MS2830A is a with top-class measurement speed at medium-class price. It has best-of-class dynamic range (average noise level [DANL]: –153 dBm, third-order intermodulation distortion [TOI]: +15 dBm) and excellent ±0.3 dB (typ.) total level accuracy using unique level calibration technology.

MS2830A

The MS2830A’s unique Capture & Playback function enables users to capture real-world signals in the field and then recreate them in the lab or on the production line. The MS2830A offers the performance and measurement speed of a high-end test instrument for a mid-range price. Features include:

Best-of-class dynamic range and total level accuracy minimize measurement uncertainty and maximize production yield
Wide variety of built-in measurement functions, including channel power, occupied bandwidth, adjacent channel leakage power (ACLR), spurious emissions, and much more
Low Phase Noise Performance option MS2830A-066 greatly improves phase noise for signals below 3.6 GHz, enabling unmatched performance for the most challenging narrowband adjacent channel leakage power and spurious emissions tests
Optional wideband vector signal analysis enables frequency vs. time, phase vs. time, spectrogram, and CCDF measurements
Comprehensive vector modulation analysis of proprietary and standard wireless communications signals, including LTE/LTE-Advanced, W-CDMA, GSM/EDGE, TD-SCDMA, CDMA2000, IEEE 802.11a/b/g/j/n/p, ZigBee, P25 Phase 1 & 2, DMR, NXDN and ITU-R Positive Train Control
Optional integrated vector signal generator produces continuous wave and I/Q modulated signals to support Tx and Rx testing
Audio Analyzer option MS2830A-018 enables complete Tx and Rx testing for analog radios, eliminating need for a dedicated instrument
Noise Figure Measurement Function option MS2830A-017 and Preamplifier option MS2830A-008 enable precise noise figure measurements

Brochure

■ Key Performance

Frequency Range	MS2830A-040: 9 kHz to 3.6 GHz MS2830A-041: 9 kHz to 6 GHz MS2830A-043: 9 kHz to 13.5 GHz
Total Level Accuracy	±0.3 dB (typ.) (include ATT switching deviation + frequency response) Note: general "absolute" amplitude accuracy does not include ATT switching deviation and frequency response.
Dynamic Range	168 dBm¹ Third-order intermodulation distortion [TOI²]: +15 dBm Average noise level [DANL*³]: -153 dBm/Hz
Adjacent Channel Leakage Power [ACLR]	-78 dBc (W-CDMA: with noise cancellation function ON)
SSB Phase Noise	-109 dBc/Hz (@ 500 MHz, 1 kHz offset, with MS2830A-066) -118 dBc/Hz (@ 500 MHz, 10 kHz offset, with MS2830A-066) -133 dBc/Hz (@ 500 MHz, 100 kHz offset, with MS2830A-066) -122 dBc/Hz (@ 220 MHz, 25 kHz offset, with MS2830A-066) Important for measuring proximity spurious, phase noise, and narrowband communications

*1: Difference between TOI and DANL as simple reference
*2: TOI (Third Order Intercept)
*3: DANL (Displayed Average Noise Level)

■ Signal Analyzer Function

Analysis Bandwidth

10, 31.25, 62.5^*4, 125^*4 MHz

*4：An image response is received when setting the bandwidth to more than 31.25 MHz.
This can be used when not inputting a signal frequency outside the MS2830A analysis bandwidth (125 MHz max.).
The MS2690A/91A/92A is recommended for other measurement purposes.

■ Vector Signal Generator (MS2830A-020/021)

Frequency Range	MS2830A-020: 250 kHz to 3.6 GHz MS2830A-021: 250 kHz to 6 GHz
Arbitrary Waveform Generator	RF modulation bandwidth: 120 MHz (Pre-installed baseband generator) Internal baseband reference clock: 20 kHz to 160 MHz
Level Accuracy	±0.5 dB (typ.)
Large-Capacity Memory	256 MB = 64 Msamples/channel 1 GB = 256 Msamples/channel (MS2830A-027) Internal AWGN generator (MS2830A-028)

■ Analog Signal Generator (MS2830A-088)

Frequency Range

100 kHz to 3 GHz

■ BER Measurement Function (MS2830A-026)

Input Bit Rate	100 bps to 10 Mbps
Input Level	TTL 3.3 V

הוספה לסל